SY2-25 Hydraulic Block Machine is a small type block machine, which can be easily operated by only one person. And it has been widely used in African countries.
(1) SY2-25 hydraulic block machine is a semiautomatic model, which is newly developed by our company on the basis of international market demand. This machine has reasonable design, good performance, easy operation and the blocks made by this machine are high in density.
(2) This machine uses a electric motor to drive the CBT-E316 gear pump, and thus produce the oil pressure(about 16mpa per cm2) to push the hydraulic oil cylinder doing to-and-fro motion. The process of shaping and demoulding can be finished in 12 seconds. The production of this machine is two times more than that of similar foreign manual models. At the same time, the labor intensity is greatly decreased.
(3) The mould of SY2-25 can not be changed, but you can adjust the screws to change the height of bricks.
(4) In oder to meet the needs of customers, we have already developed another new type block machine, which can make two blocks at a time. Also the mould can be changed so that many kind of blocks can be made with just one machine. We believe that this model will be popular among the cusomers for its perfect technology and practicability.
| Specifications: |
| Overal Size |
800(L)× 580(W)× 1200(H)mm |
| Hydraulic Pressure |
6.5Mpa |
| Demoulding Mode |
Hydraulic |
| The size of the pallet |
No need pallet |
| Weight of the machine |
300Kg |
| Voltage |
380V |
| Total power |
2.2KW |
Contact: Bobby Zhang
){kind=link}